Lyra Delos delos
Beskrivelse
GRUNDET HØJ EFTERSPØRGSEL ER DER LEVERINGSTID PÅ LYRA. KONTAKT OS FOR NÆRMERE INFO PÅ INFO@LYD-BILLED.DK
DELOS KAN LYTTES I BUTIKKEN PÅ VPI PRIME SCOUT
Compared to conventional cartridges, the Delos has a new body structure with an unusually shallow angle, and this has been paired with a unique asymmetrical damping system. When no tracking force is applied, the shape of the asymmetrical dampers forces the signal coils and core into a more upright angle than the magnetic circuit.
However, no tracking force applied means that the cartridge is not operating, and therefore any angular discrepancies between magnetic circuit, signal coils and core will have no effect on performance. When tracking force is applied, however, the force of the stylus pushing on the LP causes the asymmetrical dampers to be deformed into a symmetrical shape, and when this happens the angular discrepancies between magnetic circuit, signal coils and core all disappear. Since tracking force applied means that the cartridge is now operating, it should be clear that the design of the Delos is able to keep the angles between the magnetic circuit, signal coils and core aligned during playback.
Keeping the proper angular alignment prevents the formation of any strong and directional flux that could otherwise flow constantly from the magnetic circuit into the signal core, and enables the Delos’ core to move with equal ease in all directions, for optimal performance.
The Delos also has a microridge stylus on a boron cantilever for outstanding tracking, a non-parallel solid machined metal body for low resonances, and 6-N high-purity copper coils and nude construction for greater clarity. The result is clearly improved sound quality, particularly resolution, tracking ability, dynamic range, transient impact and immediacy.
Feel free to audition the Lyra Delos, and hear how good a New Angle can make your LPs sound.
Type Medium weight, medium compliance, low-impedance moving coil cartridge
Stylus Namiki microridge line-contact nude diamond stylus (2.5um x 75um), surface-mounted
Cantilever system Solid boron rod with short one-point wire suspension, directly mounted into cartridge body
Coils 3-layer deep, 6N high-purity copper, square-shaped high-purity iron former, 6.3ohm self-impedance, 9.5uH inductance
Output voltage 0.6mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
Frequency range 10Hz ~ 50kHz
Channel separation 30dB or better at 1kHz
Compliance Approx. 12 x 10cm/dyne at 100Hz
Vertical tracking angle 20 degrees
Cartridge body One-piece machining from solid 6063 aluminum billet, partially non-parallel shaping, body threaded directly for mounting screws
Cartridge mounting screws 2.6mm 0.45 pitch JIS standard
Distance from mounting holes to stylus tip 9.5mm
Cartridge weight (without stylus cover) 7.3g
Recommended tracking force 1.7g ? 1.8g (1.75g preferred)
Recommended load directly into MC phono input 97.6ohm ~ 806ohm (determine by listening, or follow detailed guidelines in instruction manual)
Recommended load via step-up transformer 5 ~ 15ohm (step-up transformer?s output must be connected to 10kohm ~ 47kohm MM-level RIAA input, preferably via short, low-capacitance cable)
Recommended tonearmsHigh-quality pivoted or linear (tangential) tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment